HighLine NT Rockpicker NT60E, Operator'S Manual

Page: 66 / 79

Section 6 - Storing the Rockpicker
Remove Rocks from the Frame
216086
Clean Out All Debris
214022
4. Clean all the debris from the bucket
area and off the rockpicker.
5. Remove any rocks or debris sitting on
the side frame tubes.
Rocks or debris on the frame tubes will
prevent the apron from fully lowering
onto the frame.
Rocks or debris may wedge between
the apron and the frame preventing the
apron from lowering.
6. Lower the bucket.
7. Park the rockpicker on level ground.
8. Move the hitch to the transport position
with the hitch cylinder (3) completely
retracted.
- Ensure the hitch lock is lowered and
engaged into the hitch.
Hitch In Transport Position
216232C
Page 6-3