HighLine NT Rockpicker NT60E, Operator'S Manual

Page: 33 / 79

Section 3 - Preparing the Rockpicker
Remove Rocks from the Frame - Left Side
216086
Remove Rocks from the Frame - Right Side
217002
6. Clear the bucket of any debris or rocks
that would hinder soil from exiting the
bucket.
7. Remove any rocks or debris sitting on the
side frame tubes.
Rocks or debris on the frame tubes will
prevent the apron from fully lowering onto
the frame.
Rocks or debris may wedge between the
apron and the frame preventing the apron
from lowering.
- On the left side, look along the
shielding for any rock or debris resting
on the frame.
- On the right side, open the reel
lockout access door and remove any
rock or debris on the frame.
8. Remove the apron transport locks and
place in the storage position.
- See Section 4 "Operating the
Rockpicker" for information.
Remove Debris From Bucket
214022
Page 3-4