HighLine NT Rockpicker NT60E, Operator'S Manual

Page: 26 / 79

Section 2 - Transporting the Rockpicker
Install Apron Lock - Right Side
(Reel Access Panel Shown Open)
216227C
Lower and Lock Reel Cage
216074C
Hitch In Transport Position
216077C
14. Install the apron lock (1) on the right
side of the apron.
- Place the pin of the lock into the
hole of the apron.
- Fasten with the clip pin.
15. Ensure the reel lockout access panel
(1) is closed and latched.
16. Lower and lock the reel cage.
- Ensure the cage locks (2) are
engaged on both sides.
17. Move the hitch into the transport
position.
Keep persons back when moving
the towing arm. The towing arm
can move quickly.
Contact with a moving tow arm
can cause serious injury or death.
- Retract the hitch cylinder (3) to move
the hitch into the transport position.
This reduces the travel width of the
rock picker.
Page 2-5