HighLine NT Rockpicker NT60E, Operator'S Manual

Page: 35 / 79

Section 3 - Preparing the Rockpicker
Hitch Position 1 - Dual Tractor Tires
216084
Hitch Position 2 - Single Tractor Tires
216085
Hitch Working Positions
There are 2 possible working positions for the
hitch:
- Position 1 is for tractors using dual
rear tires.
-
This hitch position moves the
rockpicker further to the right of the
tractor (more than Position 2) to
give greater visibility of the picking
process.
- This hitch position also moves the
rockpicker out of the compression
zone left by the dual rear tractor
tires.
- Position 2 is for tractors using single
rear tires.
- This hitch position moves the
rockpicker to the right of the tractor
(less than Position 1) out of the
compression zone left by single
rear tractor tires.
Parts on the hitch must be moved to set the
hitch for the different working positions.
- See the directions below for setting
the hitch positions.
Page 3-6