Highlight Synergy 0.5, Operation Manual

Page: 53 / 57

Technical References Synergy 0.5 Turntable Stretch Wrapper Operation Manual
Highlight Industries, Inc. ● 2694 Prairie SW, Wyoming, Mi 49519 ● 1-800-531-2465
52
0.5/0.5
Full Menu Code Code
Description Default Setting
I/O tCC Type of control (2 wire) 2C *
AI1 AI1t Analog Input Type 5U *
r1 Relay Output r1 FLt *
tOL Application Overload Time Delay 0 sec *
LOC Application Overload Threshold (% of nCr) 90% *
AO1 AO1 Analog Output Assignment nO *
AO1t Analog Output Type 0A *
drC bFr Standard Motor Frequency 50 Hz 50 Hz
nPr Motor Rated Power PLATE 0.37
CoS Rated Motor Cos Phi PLATE *
UnS Nominal Motor Voltage 230V *
nCr Motor Plate Current Rating PLATE 1.9
FrS Nominal Motor Frequency 50 Hz 50 Hz
nSP Motor Speed Rating PLATE 1350
tFr Maximum Output Frequency 72 Hz 50 Hz
Ctt Motor Control Type Std *
UFr IR Compensation 100% *
StA Frequency Loop Stability 20% *
FLG Frequency Loop Gain 20% *
tUn Motor Auto Tuning nO YES
→No
CtL Fr1 Speed Control Reference AI1 AIU1
CHCF Motor Control/Channel Configuration SIM SEP
Cd1 Command Channel 1 tEr *
FUn rPt ACC Acceleration Time (Seconds) 3 2.0
dEC Deceleration Time (Seconds) 3 2.0
rPt Ramp Shape Assignment Lin *
brA Decel Ramp Adaption Assignment YES dYnA
Stt Stt Type of Stop rMP *
rrS Reverse Direction nO *
AdC AdC Automatic DC Injection YES *
SdC1 Automatic DC Injection Current 70% *
tdC1 Automatic DC Injection Time 0.5 sec *
CL1 CL1 Current Limitation 1.5 In *
SPL LSP Low Speed (Min Hz) 0 Hz *
HSP High Speed (Max Hz) 60 Hz 50 Hz
FLt rSF Detected Fault Reset Assignment nO *
AtR Atr Automatic Restart nO YES
tAr Max Automatic Restart Time 5 min *
FLr Flying Restart nO YES
tHt ItH Motor Thermal Current PLATE 1.9
ALTIVAR 12 DRIVE PROGRAMMING PARAMETERS
Drive #
Drive/Motor HP
Function Controlled
TURN-
TABLE
Drive
This table represents the Electrical Schematics Page 2