Installation & Adjustments
Synergy 0.5 Turntable Stretch Wrapper Operation Manual
Highlight Industries, Inc. ● 2694 Prairie SW, Wyoming, Mi 49519 ● 1-800-531-2465
17
Monitoring Parameters
Code Name/Description
Unit
LFr
External reference value:
External keypad or local force mode configured. Forced local reference
FLOC page 61 set to LCC and Forced local assignment FLO page 61
different to nO.
Displays the speed reference coming from the remote keypad. This
value is not visible in factory setting.
Hz
rFr
Output Frequency:
This function provides the estimated motor speed. It corresponds to the
estimated motor frequency (on the motor shaft). In Standard law the
Output frequency rFr is equal to stator frequency. In Performance law
the Output frequency rFr motor speed is equal to the estimated motor
speed.
Range: -400 to 400 Hz
Hz
LCr
Motor Current:
Estimation of the effective motor current from phase current
measurements with an accuracy of 5%. During DC injection, the current
displayed is the maximum value of current injected in the motor.
A
ULn
Main Voltage:
Line voltage from the point of view of the DC bus, motor running or
stopped.
A
StAt
Product Status:
rdY
– Drive Ready
rUn
– Drive Running
ACC
– Acceleration in progress
dEc
– Deceleration in progress
dCb
– DC injection braking in progress
CLi
– Current limit
nSt
– Freewheel stop control
Obr
– Auto-Adapted deceleration
CtL
– Controlled stop on mains phase loss
tUn
– Auto-tuning in progress
FSt
– Fast stop active
nLP
– No line power
N/A
