Trouble-shooting
Synergy 0.5 Turntable Stretch Wrapper Operation Manual
Highlight Industries, Inc. ● 2694 Prairie SW, Wyoming, Mi 49519 ● 1-800-531-2465
40
Warning!
Make sure that only qualified personnel will perform inspection, troubleshooting,
and part replacement.
High Voltage!
Disconnect all power including external control power that may be present
before servicing the frequency drive controllers. Wait three (3) minutes for the
DC bus capacitors to discharge. The frequency drive controller display and/or
LED’s are not accurate indicators of the absence of DC bus voltage.
Before You Start
The diagrams in this section will guide you in identifying typical problems while operating
the Synergy Turntable Stretch Wrapper, and provide you with corresponding solution(s).
Problems are divided in reference to the machine functions: power, turntable, film carriage,
and film delivery.
If further assistance is required, contact the distributor from whom you have purchased the
equipment, or call the number listed on the bottom page of this manual. To receive quick
and proper technical support, please be prepared to provide the following information:
1. Machine serial number
2. Date of purchase
3. Symptoms of any problems
General Troubleshooting Practices
1. Always adhere to the General OSHA or the State OSHA guidelines.
2. When working with machine wiring, take precautions to prevent contact with live
wires.
3. Ensure that all wiring is securely fastened and that all terminals are tightened down
properly.
4. Have a multi-meter nearby to be able to check for voltages and continuity on
different portions of the machine circuitry.
5. Use the schematics provided in this manual to trace wiring and find components on
the sub panel.
Troubleshooting Guide
