Installation & Adjustments
Synergy 0.5 Turntable Stretch Wrapper Operation Manual
Highlight Industries, Inc. ● 2694 Prairie SW, Wyoming, Mi 49519 ● 1-800-531-2465
16
3. Unit LED. When illuminated it indicates when a unit, such as AMPS, is being
displayed.
4. ESC button. Exits a menu or parameter, or aborts the displayed value and returns to
the previous value in the memory.
5. STOP button. Stops the motor. The run command will have to be cycled before the
motor will be allowed to run again.
6. RUN button. Starts running the motor if the drive is configured for control by the
drive keypad.
7. Jog Dial. Used for navigation of the menus. Turn clockwise or counterclockwise to
scroll through the menu list and is used for selection/validation when the dial is
pressed.
8. MODE button. Switches between the control/programming modes.
9. CONFIGURATION mode LED. When illuminated it indicates when a value can be
changed.
10. MONITORING mode LED. When illuminated it indicates when the display is
monitoring the current status of the drive.
11. REFERENCE mode LED. When illuminated it indicates when the display is showing
the speed reference value.
12. Four 7-Segment displays. The display of the drive for menus and settings.
Menu Structure
To access the monitoring parameters, press the wheel on the
face of the frequency drive. Using the wheel, scroll through the
menu until the display shows Non (Mon) for monitoring mode.
This gives the user access to all the monitoring parameters.
To access the complete set of drive parameters first press the wheel to access different
modes. Using the wheel, scroll
to “COnF” and press the wheel again; this will access
different sets of parameters. Using the wheel, scroll to “FULL” and press the wheel; this will
give the user access to the complete parameter set.
