Herz firestar de Luxe 18, Operating Instructions Manual

Page: 71 / 90

Maintenance schedule 11
71
Item Procedure
Burning chamber
Cleaning of the combustion chamber
This only has to be cleaned every two to
six days, depending on the type of fuel
used
When burning fuels with a high proportion
of fly ash (e.g. paper, cardboard, bark,
etc.) on combustion, the combustion
chamber
should be cleaned more
frequently:
- Open the casing door and ash door (7)
- Clean the combustion chamber
- Keep the primary air feeds (3) clean with
bellows for primary air feeds (19)
- Keep the combustion plate inputs (5)
clean with bellows for primary air feeds
(19)
- Clean out the combustion tray and
combustion plate using the bellows for the
combustion plate (18)
- Close the ash door (7) and casing door
- Wood charcoal remains or incompletely
burnt wood pieces are not a defect.
These residues are to remain on the grate
(combustion chamber) and facilitate a
renewed heating up. The central aperture
(slit) must always remain free. Only after
several inches of ashes lie on the grate,
these is to remove as follows.