Herz firestar de Luxe 18, Operating Instructions Manual

Page: 56 / 90

9 Boiler control
56
9.14.1 Network configuration
Navigation 1: Navigation 2:
Screen: Screen:
By pressing the button: By pressing the button:
NetBIOS Name the NetBIOS name can be set up DNS 1 / DNS 2
the IP address of the DNS server
can be set up
IP-Address
The boiler IP address can be set
up the network configuration page
will be displayed again
Subnetmaske the subnet mask can be set up
Note:
DNS means D omain N ame S ystem which unpacks a
domain into the corresponding IP address. That
means, by setting up the DNS server, the T
CONTROL is able to send E-mails.
We recommend the following configuration:
DNS 1: 8.8.8.8 (= DNS Server of Google, it is public
and free. That can be an alternative to the internet
provider’s server)
DNS 2: DNS
– Server of the internet provider
Gateway-
Address
the gateway address can be set
up
the settings can be saved
the submenu for the DNS settings
will be displayed
Connection
test
The network connection can be
tested
Network connection ok:
Internet
connection of the
controller is ok
DNS fault:
no or incorrect DNS address
stored
no internet connection:
check LAN-cable
DHCP
active
When activated, the IP-address
assigned automatically (if the
controller is connected to the
router) If you don't know the
network settings, it makes sense
to activate DHCP
to return to the settings overview.
To connect a T-Control via WLAN to a network, a WLAN repeater with a LAN port is required. It is also
possible to use a router with repeater mode.