39
2 Description
2.4.2 Symbols for operating modes and functions
Fixed quantity operating mode is selected
(quantity program)
Operating Mode “Quantity”.
Fixed dosing time operating mode is selected
(time program).
External control start/stop operating mode is
selected
("Cont-Mode“ or "Continuous Operation").
Rotor spray activated
– rotor spray not activated.
Store all parameters and settings
permanently.
Apply settings and return to the previous
screen.
Switch to the screen for device settings
(Factory settings, pump calibration, display
contrast).
Reset device to the factory settings
(after confirmation prompt).
Calibrate the pump
(move the rotor exactly 10 revolutions for
measuring the dosed volume).
Enable or disable the volume counter
intended for directly connected syringes. If a
volume is set and no external reservoir is
connected, this feature is switched on.
Adjust the contrast of the screen.
When replacing an empty syringe with a full-
one, the left button has to be pressed. Thus,
the controller knows that you are working
with a full product syringe. The adjustment is
set to FULL = 100%.
The right button can be used to keep the actual level (similar like ESC ).
Summary of Contents for 1880232
Page 1: ...30 0 Opera ng Manual Bedienungsanleitung EQ RC15 Pump Controller 1880232 ...
Page 2: ...2 ...
Page 63: ...63 ...
