50
5 Start-up
5.1 Changing/setting a numerical value
When a value is to be changed, touch the
display field of the value.
(Here, for example, the dispensed quantity on
the main screen).
The value is then shown against a black
background.
When the screen is no longer being touched, it
switches over to rapid value adjustment.
The value is now displayed alone at top right
with the associated unit.
On the top left of the screen there is a symbol
remembering which parameter is to be
adjusted and, if applicable the symbol showing
the actual program.
In this case a measuring beaker for the dosing
quantity and program X.
In the center of the screen the value is shown
within its possible adjustment ranges as a bar.
This bar in the diagram can be directly moved
for fast and intuitive but rough adjustment, or
the new desired position within the diagram
can be pointed to by direct touching.
5.2 Entering values and saving all settings
Temporary acceptance of the new values
:
For step-by-step approach to the desired
settings, the values should be adjusted and the
screen exited with the
ENTER
key.
Permanent saving of all parameters
:
The settings should be saved if currently no
more changes are required.
Unsaved settings will be lost if the device is
switched off.
Summary of Contents for 1880232
Page 1: ...30 0 Opera ng Manual Bedienungsanleitung EQ RC15 Pump Controller 1880232 ...
Page 2: ...2 ...
Page 63: ...63 ...
