Hella APS-R, Installation And Configuration Manual

Page: 33 / 65

n Click the “play” button ( Fig. 30/4) for a live view. The “play”
button change to “pause” button during live view.
n Click the “forward” button ( Fig. 30/3) to refresh view if live
view paused. The “forward” button is deactivated during live
view.
n Use the slider control ( Fig. 30/2) to change the brightness of
the live view. Slide to the right for a brighter view. Slide to the
left for a darker view.
n Use the “Mark objects” button ( Fig. 30/1) to show or hide
tracked objects.
The device displays a diagnostic status and the electrical status of
the programmable inputs.
Optical Self Diagnosis (OSD) Status
n Ok
Normal state.
n Covered
One or both camera sensors covered, e.g. by a sticker.
n Too dark
Illumination is too low for proper function or both cameras are
completely covered.
n Too bright
Illumination is too bright for proper function.
Programmable input
n IN0
Electrical status of input 0.
n IN1
Electrical status of input 1.
Counting Information for up to 10 counting lines can be shown.
1 Show / hide the counting line in the live view.
2 Count for incoming and outgoing persons.
3 Sets the count information to 0 in the user interface. Reset has
no effect on internal counts or data protocols.
4 Counting line identifier used in the live view .
5 Name for the counting line used in the user interface as well as
in interfaces.
6 Door symbol shows the activation status of the counting line.
Open door symbol: counting is active.
Closed door symbol: counting is inactive.
6.4 Camera Position
In order to obtain correct counting results, the position and align-
ment of the device at the installation site must be set.
Camera View
Mark objects
A A
1 2 3 4
Fig. 30: Live View
Device Information
Fig. 31: Device information
Counts
1
2
3 4
5
6
Fig. 32: Counts with 1 counting line
Configuration
Camera Position
09.06.2017 33
The reproduction, distribution and utilization of this document as well as the communication of its contents to others
without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.