3. Interfacing
Technical Manual P/N 9894.00.G6
3-9
Table 26- J8 Connector - P/N 9916.00/.01
Signal Name
Pin
Description: Tube Housing Interlock Connection
Refer to
Tube 1 Housing
1
Tube 1 Housing Return
2
A pull-up voltage of +5V
DC
is present on the input
terminals. The interlock input must be held low
(active) to allow the exposure on tube # 1.
Tube 2 Housing
3
Tube 2 Housing Return
4
A pull-up voltage of +5V
DC
is present on the input
terminals. The interlock input must be held low
(active) to allow the exposure on tube # 2.
§ 2.5.2
3.1.3
Optional Boards
3.1.3.1
Fluoro PMT Board P/N 9822.00
Table 27- J1 Connector – 9822.00
Signal Name
Pin Description (RG-59/U coaxial, BNC terminated)
Refer to
PMT High Voltage supply
1
High voltage supply for the phototube
§ 3.7.1
Ground
2
0 V
DC
Table 28- J2 Connector – 9822.00
Signal Name
Pin
Description: Additional footswitches
Refer to
Prep Switch
1
When low, prep is initiated in the selected workstation
RAD Switch
2
When low, RAD is initiated in the selected workstation if
all prerequisite conditions are validated :
Prep active, interlock(s) and rotor are OK
Fluoro High Level
3
Low for Fluoro High level
Fluoro Low Level
4
Low for Fluoro Low level
Footswitch common 5 thru 8 Return signal for the four exposure switches
§ 3.2.1
