EPS 45-80 High-Voltage Generator
3-6
Technical Manual P/N 9894.00.G6
Table 19- J7 Connector - P/N 9798.01
Signal Name
Pin
Description:
CAN BUS serial port for secondary console
communication or biplane system
(emd purposes only)
+ 24V DC
1
For use with Epsilon Operator Console only.
CAN H
2
CAN bus interface signal.
GND
3, 4
Ground
10 k
Ω
to + 24 V
DC
5
Epsilon biplane master: power output.
N.U.
6, 7, 8 N.C.
Footswitch Console
Common Enabled
9
Safety signal (independent from serial interface)
Exposure is allowed only when this pin is grounded via “Console
Common Enabled” set from CPU (bit activated thru Epsilon PC Tools
configuration)
CAN L
10
CAN bus interface signal.
GND
11, 12 Ground
RPWR+
13
Epsilon biplane slave: power output.
N.U.
14, 15 N.C.
Table 20- J16 Connector - P/N 9798.01
Signal Name
Pin
Description
Ground
1, 9
TX
2
RX
3
DTR
4
Ground
5, 6
RTS
7
CTS
8
Generator serial port used for connecting a PC in order to configure the
generator using
Epsilon PC Tools
program. Signals comply with RS-232
specifications. Refer to § 3.8.1.
Baud rate: 57, 600
