4. System Setup
Technical Manual P/N 9894.00.G6
4-9
8.
After the installation is completed, click the Finish button (Figure e). Then, verify on which
port the driver has been installed on your laptop. This is done using the Windows control
panel (Figure f):
Control Panel/System/System Properties Hardware/Device Manager/Ports (COM &
LPT1)/USB Serial Port (EMD technologies settings) (COM“
n”
).
Figure e –
End of Installation.
Figure f –
Device Manager.
< Figure g –
Serial Communication Settings on
Epsilon PC Tools.
9.
Open the PC Tools Program. Choose “Transfer/Settings” and select the correct COM port.
Click the OK button (figure g).
10.
The communication with the operator console can now be established.
