4. System Setup
Technical Manual P/N 9894.00.G6
4-25
AEC Zero Point (Fluoro-RAD kV Transfer Curve)
10.
If necessary, click on the
AEC Zero Pt
tab to adjust the Fluoro-RAD kV Transfer Function.
This curve is defaulted to 1:1 (slope = 0, b=0) and can be modified by moving one or both
curves extremities. The slope cannot be negative.
Figure 4.14
–
Fluoro-RAD kV Transfer Function Module.
Saving/Sending Workstation Configuration
11.
Use the File menu to save the workstation configuration on your hard disk and send the data to
the generator.
