Control
S. 56
10.2.3.3
Establishment protocol
In the "
Establishment protocol
" area an establishment protocol can be generated and sent by e-mail. The establishment protocol
contains all the information about your
heatapp!
configuration.
Generating the establishment protocol
•
A new report is created by tapping on the button "
Generate a new establishment protocol
".
The establishment protocol is saved in the
heatapp! base
until a new establishment protocol is generated.
This means that at any time you can access the last generated establishment protocol (button "
Display establishment protocol
")
and / or send a PDF by e-mail (button "
Send establishment protocol
").
Sending an establishment protocol by e-mail
1.
Tap on the button "
Add a new e-mail address
".
2.
Enter the new e-mail address to which the establishment protocol is to be sent. You can enter more than one e-mail
address.
3.
Tap on "
Send establishment protocol
" to send the establishment protocol.
If the establishment protocol has been sent successfully, a corresponding message is displayed.
Tap button
to return to the "
System
" menu.