Technische Daten
S. 120
18.2
heatapp! base T2B
heatapp!
base T2B
heatapp! base
is the central control and regulation unit of the system.
heatapp! base
can be connected to the heat generator and with the
THETA Controller of an existing system and transmit the heat demand
to the heat generator. In this way genuine single room heat regulation
with demand requests is possible in accordance with EN 15232.
Using the
heatapp! base
T2B
up to four
heatapp! drive
/
heatapp! floor
channels can be controlled per room. A maximum of 24 rooms can be
controlled.
heatapp! base T2B
also communicates with the
heatapp! gateway
via
the home network.
The connection to the home network can also be made via Wi-Fi using
the
heatapp! Wi-Fi stick
which is available as an accessory.
Scope of delivery:
•
heatapp! base T2B
•
Ethernet cable
•
Bag of fasteners with cord grips
Article numberr: 9600302000
Technical data
Installation
Wall mounting
Operating system
Linux
Connections
•
External
•
2 x USB 2.0
•
RJ45 Ethernet
•
Internal (screw terminals)
•
Mains voltage L, N, PE
•
Energy generator relay
•
Energy generator bus (Open Therm)
•
0 ... 10 V output
•
Sensor input (optional)
Power supply
230 V ±10 %, 50 Hz
Power consumption
5 VA
Protection class
II for wall mounting
IP rating
IP20
Fusing
User-supplied
Relay output
Potential-free contact, maximum 230V / 2A
Energy generator bus
T2B
Bus (THETA 2-wire Bus)
Ambient conditions
•
Storage temperature
•
Operating temperature
-25 ... +60 °C
-10 ... +50 °C
Standards
EN 60730
Dimensions
160 x 160 x 34 mm (length x width x height)
Weight
335 g
Colour
Traffic white RAL 9016