Control
S. 38
Room selection
Rooms are displayed with their room images in the room selection. Vertical swiping scrolls through the rooms in a group.
Horizontal swiping scrolls through the room groups.
Rooms are selected by tapping. The selected room is highlighted with a red-orange border.
Small icons in the room images display the current temperature and the currently active operation mode. If the heatapp! base is
connected to the energy generator, the icons are displayed in red if there is a heat requirement and purple if there is no heat
requirement. Rooms can be assigned to groups (see also chapter “Editing rooms and room groups” ).
Symbol
Operating mode
Automatic mode comfort-temperature. Heating mode is active after the set cycle time. This relates to a
repeating temperature defined in the timer programs.
Automatic mode economy-temperature. Heating mode is active after the set cycle time. This relates to a
repeating temperature defined in the timer programs.
Automatic mode set-back-temperature. Reduce mode is active after the set cycle time.
Heating mode takes place with the set required temperature until the end of the cycle time, however for at
least 3 hours.
Standby function. Using the standby function, the selected rooms are switched off in a frost-protected
manner. In contrast to the holiday scene, the standby function has no time limit.
Window closed. Control according to the set desired temperature.
Window open. Control takes place in accordance with the parameters defined in the
heatapp! base
Expert >
Room menu.
Summer mode. Deactivation of the request to exceed the set outdoor temperature value.
Corresponding scene active for the room.
Temperature
setting via rotary wheel
"Tapping and rotating" of the rotary control sets the temperature for the currently selected room.
This desired temperature is indicated in the room image using the magic wand. It applies until the timer program end, as a
minimum, however, for the time set in expert mode.
In this way the operator can reduce the sensitivity of the rotary wheel, by moving their finger out of the rotary control without
lifting it off. The sensitivity becomes smaller the greater the distance from the rotary control.