Technische Daten
S. 119
18
Technische Daten
18.1
heatapp! base
heatapp! base
is the central control and regulation unit of the system.
heatapp! base
can be connected to the heat generator of an existing
system and transmit the heat demand to the heat generator. In this way
genuine single room heat regulation with demand requests is possible in
accordance with EN 15232.
Using the
heatapp! base
up to four
heatapp! drive
/
heatapp! floor
channels can be controlled per room. A maximum of 24 rooms can be
controlled.
heatapp! base
also communicates with the
heatapp! gateway
via the
home network.
The connection to the home network can also be made via Wi-Fi using the
heatapp! Wi-Fi stick
which is available as an accessory.
Scope of delivery:
•
heatapp! base
•
Ethernet cable
•
Bag of fasteners with cord grips
Article number: 9600301000
Technical data
Installation
Wall mounting
Operating system
Linux
Connections
•
External
•
2 x USB 2.0
•
RJ45 Ethernet
•
Internal (screw terminals)
•
Mains voltage L, N, PE
•
Energy generator relay
•
Energy generator bus (Open Therm)
•
0 ... 10 V output
•
Sensor input (optional)
Power supply
230 V ±10 %, 50 Hz
Power consumption
5 VA
Protection class
II for wall mounting
IP rating
IP20
Fusing
User-supplied
Relay output
Potential-free contact, maximum 230V / 2A
Energy generator bus
Open Therm
Ambient conditions
•
Storage temperature
•
Operating temperature
-25 ... +60 °C
-10 ... +50 °C
Standards
EN 60730
Dimensions
160 x 160 x 34 mm (length x width x height)
Weight
335 g
Colour
Traffic white RAL 9016