heatapp! Components
S. 12
3.7
heatapp! single floor
The heatapp! system operates a Z-wave component available on the open market, to be able to execute heating-relevant
functions. Only those components which we declare as having been heatapp! checked can be assigned a room in heatapp! and
consequently adopt a heating-relevant function. Switchable wireless sockets and in-wall relays are used to control electrical
heaters, such as fan heaters, infrared heaters or panel heaters. These are detected in the system as a
heatapp! single floor
unit.
A list of
heatapp!
checked components from other manufacturers can be downloaded from
https://heatapp.de/service/downloads/
3.8
heatapp! sense
The
heatapp! sense
is a room sensor for measuring the current temperature in rooms with underfloor heating.
Thanks to
wireless technology, the position of the heatapp! sense in the room can be flexibly selected; nevertheless is must not be covered
to ensure it receives accurate temperatures. The
heatapp! sense
communicates wirelessly with the
heatapp! gateway
.
3.9
heatapp! sense control
The heatapp! sense control is used to measure the current temperature and to display the air humidity, as well as the desired
temperature setting (setpoint) for a room. Thanks to the battery-operated wireless technology, the position of the heatapp!
sense control in the room can be flexibly selected; nevertheless is must not be covered to ensure it receives accurate
temperatures. The heatapp! sense control communicates wirelessly with the
heatapp! gateway.
3.10
heatapp! repeater und heatapp! repeater S
heatapp! repeater and heatapp! repeater S are used to improve the wireless coverage in a system. If one or more radio
components are inaccessible, a heatapp! repeater is positioned between the heatapp! gateway and the radio component that
cannot be reached thereby improving the wireless coverage. In very large rooms or buildings with strongly attenuating building
materials (e.g. reinforced concrete), it may be necessary to use stronger repeaters. In this case, the heatapp! repeater S is used.
3.11
Window sensor
The
heatapp! system
operates a Z-wave component available on the open market, to be able to execute heating-relevant
functions. Only those components which we declare as having been
heatapp! checked
can be assigned a room in heatapp! and
consequently adopt a heating-relevant function. Z-wave window contacts are used to control window shutdown of the heating
system in accordance with the configured function. In this way, control is more efficient because the window shutdown function,
dependent on configuration, switches off the heating until the window is closed again. To enable this configuration, ensure
components are
heatapp! checked
before purchasing. A list of
heatapp! checked
components from other manufacturers can be
downloaded from https://heatapp.de/service/downloads/.