manualshive.com logo in svg

HeartSciences MyoVista wavECG, User Manual

Share
Download
HeartSciences MyoVista wavECG User Manual Download Page 97

 

88

USER MANUAL   DO-LBL-06035(L)

  

 | MyoVista® Wavelet ECG (

wav

ECG™) 12-Lead Cardiac Testing Device

Device Settings

Export Logs

Export Logs allows administrative users to export device logs for troubleshooting and diagnosing 

device errors .

 

Note: To protect any sensitive information that may be stored on the device, the file is 

encrypted and must be sent to your authorized HeartSciences representative for decryption 

and diagnosis.

1 .  Under System Settings, select the Export Logs icon . The Export System Logs screen appears as 

shown in Figure 5-44 . 

Figure 5-44. Export Logs Screen

2 .  Select the Disk to export to .
3 .  The system automatically populates the Filename . However, you can change the Filename .
4 .  Select the Export button . Upon successful completion, the following message will appear .

Export Logs Succeeded

5 .  Select the OK button to dismiss the dialog .

Summary of Contents for MyoVista wavECG


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands