manualshive.com logo in svg

HeartSciences MyoVista wavECG, User Manual

Share
Download
HeartSciences MyoVista wavECG User Manual Download Page 114

 

105

USER MANUAL   DO-LBL-06035(L)

  

 | MyoVista® Wavelet ECG (

wav

ECG™) 12-Lead Cardiac Testing Device

Service – Maintenance & Cleaning

Cleaning and Disinfecting

Clean and disinfect the exterior surfaces of the MyoVista Device before you use it for the first time . 

After the initial cleaning, clean the device every month or more frequently if required by healthcare 

facility protocol .

Housing Cleaning

To clean the housing of the MyoVista Device:
1 .  Wipe with a clean cloth dampened in a mild soap and water solution .
2 .  To disinfect, wipe with a cloth dampened with alcohol .
3 .  Use the following solutions, as recommended in the APIC Guidelines for Selection and Use of 

Disinfectants (1996):
–  Sodium hypochlorite (5 .2% household bleach) minimum 1:500 dilution (minimum 100 ppm 

free chlorine) and maximum 1:10 dilution

–  Any sodium hypochlorite wipe product that meets the above guidelines can be used .

4 .  Dry with a clean cloth or paper towel . Drying times depend on environmental conditions .

Patient Cable Cleaning

1 .  Before cleaning, remove the patient cable and the electrode lead wires from the device .
2 .  To clean the cable, wipe with a lightly moistened cloth dampened in a mild soap and water 

solution .

3 .  To disinfect, wipe a cloth dampened with isopropyl alcohol .
 

Use the following solutions, as recommended in the APIC Guidelines for Selection and Use of 

Disinfectants (1996):
–  Sodium hypochlorite (5 .2% household bleach) minimum 1:500 dilution (minimum 100 ppm 

free chlorine) and maximum 1:10 dilution

–  Any sodium hypochlorite wipe product that meets the previous guidelines can be used .

4 .  Dry with a clean soft cloth or paper towel . Drying times depend on environmental conditions .

LCD Screen Cleaning

The MyoVista Device incorporates a touch panel . Fingerprints and other stains are likely to appear on 

the touch panel . 

 

Note: Never use a strong or acidic cleaning solution. Do not wipe the surface with any coarse-

textured cloth or gauze, as it may damage the specially coated screen. Use a non-abrasive 

soft cleaning cloth only.

Use a commercially available cleaning solution designed for LCD screens . A soft cleaning cloth or 

eyeglass cleaning cloth may also be used . Do not get the device wet or introduce liquids . Dry with a 

clean soft cloth .

Summary of Contents for MyoVista wavECG


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands