manualshive.com logo in svg

HeartSciences MyoVista wavECG, User Manual

Share
Download
HeartSciences MyoVista wavECG User Manual Download Page 15

 

6

USER MANUAL   DO-LBL-06035(L)

  

 | MyoVista® Wavelet ECG (

wav

ECG™) 12-Lead Cardiac Testing Device

 

Warning: Never put any cable other than the power adapter into a wall receptacle .

Warning: Never use the device in the presence of flammable vapors or gases .

 

Warning: Do not use the device beyond the safe limits of environmental conditions of temperature 

and humidity (see “Environmental Specifications” on page 108) .

 

Warning: Do not allow liquids to enter the device . Do not have liquids or drinks near the device . 

An accidental spill of liquid on the device can create a hazard of electric shock or damage to the 

device . If liquid does get into the device, contact an authorized technician before use .

 

Warning: MyoVista Information and Glasgow Interpretative Analysis must be interpreted by a 

licensed healthcare practitioner .

Cautions

General Cautions in this User Manual are listed below and displayed with the following Caution symbol . 

 

 

Caution: Always confirm the patient’s identification and the information displayed before starting  

a test .

 

Caution: When using the VESA mount interface on the back panel, be careful to check the adequacy 

of the surface (for example, the cart, wall, or shelf) to which the device will be attached . The VESA 

mount and surface should be able to support 8 kg (17 .6 lbs) .

 

Caution: When setting up, be careful to place the device in a stable location, away from the edge of 

tables or carts . Avoid entangling the cables with the patient or the operator .

 

Caution: Do not attempt to reposition the device by pulling the cables . Be careful not to cause the 

device to fall by attempting to pull the device by the cables . Always ensure all cables are positioned 

properly to avoid damage .

 

Caution: Patient cable must be inserted properly into the device, with the screws secured tightly to 

ensure signal capture .

 

Caution: The device should be plugged into a grounded outlet with surge protection .

 

Caution: The device and cables should be cleaned regularly according to instructions .

 

Caution: Periodically check the battery performance, and have the battery replaced or serviced by 

an authorized technician if necessary . For instructions about monitoring the battery, see “Using 

the Built-In Battery” on page 34 .

 

Caution: Do not use the device beyond its intended lifetime, which is 7 years from the 

manufacturing date .

Safety Summary

Summary of Contents for MyoVista wavECG


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands