manualshive.com logo in svg

HeartSciences MyoVista wavECG, User Manual

Share
Download
HeartSciences MyoVista wavECG User Manual Download Page 101

 

92

USER MANUAL   DO-LBL-06035(L)

  

 | MyoVista® Wavelet ECG (

wav

ECG™) 12-Lead Cardiac Testing Device

Device Settings

ECG Trace Colors

ECG Trace Color allows users to configure the ECG trace colors for the device .
To configure ECG trace colors: 
1 .  Under ECG Settings, select the ECG Trace Color icon . The ECG Trace Color screen appears, as 

shown in Figure 5-48 . 

Figure 5-48. ECG Trace Color Screen

2 .  Select a lead to change the color, and then keep pressing over the desired lead to move through 

all the colors until you select the desired color . The available colors are green, blue, brown, 

purple, yellow, white, and red .

3 .  Repeat step 2 for each desired lead .
4 .  Move the Grid Brightness slider to the right or left to select the desired grid brightness .

 

Note: Grid Brightness determines the transparency of the grid lines behind the ECG waveform 

traces. It does not change the brightness of the screen where the grid is displayed. To change 

screen brightness, see “LCD Brightness Settings” on page 90.

5 .  Select the Save icon to save the settings or select Cancel icon to discard them .

Summary of Contents for MyoVista wavECG


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands