manualshive.com logo in svg

HeartSciences MyoVista wavECG, User Manual

Share
Download
HeartSciences MyoVista wavECG User Manual Download Page 42

 

33

USER MANUAL   DO-LBL-06035(L)

  

 | MyoVista® Wavelet ECG (

wav

ECG™) 12-Lead Cardiac Testing Device

MyoVista Operations

If the device screen is active, an icon in the status bar shows the power source (see Table 4-2) . If the 

device is in standby mode, an illuminated LED on the Standby button shows the power source and/or 

battery charge level (see Figure 4-3 and Table 4-3) .

Figure 4-3. Power Source Indicator (Standby Button)

 

Note: The LED on the Standby button is not illuminated when the screen is on

 .

Table 4-2 . Status Bar Power Indicator (AC/Battery)

LED

Description

Device is operating on AC power and/or is charging

Device is operating on battery power and has sufficient charge to 

perform a test; battery is fully charged

Device is operating on battery power and has sufficient charge to 

perform a test; battery is partially charged and should be charged and/

or switched to AC power

Device is operating on battery power; battery is close to depletion and 

must be charged and/or switched to AC power

Table 4-3 . Standby Button Power Indicator

Standby battery status

Description

Solid 

green

Device is operating on AC power and/or is charging

Blinking 

green

Device is operating on battery power and has sufficient charge to perform a test

Blinking 

yellow

Device is operating on battery power; battery is close to depletion and must be 

charged and/or device must switch to AC power

Blinking 

red

Device is operating on battery power; battery is almost fully depleted . The device 

should be charged immediately and/or device must switch to AC power before 

running a test

The built-in battery operates in the following modes:
•  Charging or Fully Charged
• Discharging
These modes are indicated by symbols in the status bar or the LED on the Standby button .

Summary of Contents for MyoVista wavECG


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands