HDG Compact 25, Operation Manual, Page: 97 / 188

5 Commissioning the system – Procedure
97
S
AVING OPERATING PARAMETERS
Once the heating system has been configured, i.e. all of the parame-
ters have been adjusted, the set of parameters must be saved.
1. Simultaneously press the Plus and Enter buttons.
✓
The display changes to the service level.
✓
The cursor is positioned on the parameter group
1-General
.
2. Press the Enter button.
3. Using the Down button, scroll to the parameter group
General 1-06
.
4. Press the Enter button.
✓
The cursor flashes on
0
.
5. Increase the value to
1
with the Plus button.
6. Press the Enter button.
✓
The settings of the initial commissioning are saved and can be re-
loaded at any time if lost by calling up the parameter
General 1-07
.
✓
The setting of the parameters is completed.
Enter
Enter
No. Display Description
1-06 General information
Operating parameters
save
( 0) 0
• The set operating parameters can be saved.
Table 5/8 - Saving operating parameters
Enter
Enter