as follows:
Name -
Create a custom name if desired.
Type -
Select the type of lights configured (UCL, CL4.0 or CL 2.5).
Relay -
Select the Smart Relay that is wired to the group of lights.
Set Mode -
Set the mode of the lights configured (UCL, CL4.0 or CL 2.5).
Delete Group of Lights -
From this screen, if you wish to delete a group of lights
that is currently configured, select the Delete button on the right of the name of the
lights group that you wish to delete.
If Accessories is selected:
Add Accessory -
Pressing “Add Accessory” from this screen will take you through
the full configuration for adding a new accessory. These steps are described in the
Advanced Configuration Guide section of this manual.
Select an Accessory -
Once you select an accessory, all of the options for that ac-
cessory will appear on the next screen. These options are as follows:
Name -
Create a custom name if desired.
Type -
Select the type of accessory configured (Laminar, Dimmer, etc.).
Pump -
Configure the accessory pump, if used.
Valve -
Configure the accessory valve, if used.
Speed -
Change the minimum and maximum allowed speeds of the accessory
pump as well as the Low, Medium and High speed settings. This option only
appears if the accessory pump is configured as a VSP.
Priming -
Select whether you want the accessory pump to prime. This option is
only available if the accessory pump is configured as a 2-Speed or VSP.
Freeze Protect -
Select whether you want the accessory to turn on for Freeze
Protection. Also set the Freeze Protect air temperature threshold from this
menu.
Relay -
Select the Smart Relay that is wired to the accessory. This option only
appears if the accessory does not have an associated pump configured.
Delete an Accessory -
From this screen, if you wish to delete an accessory that is
currently configured, select the Delete button on the right of the name of the acces-
53
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
