Smart Relays
Like VSPs, Smart Relays rely on communication from the Wiring Hub. Their 4 conductor cable is
wired to the same connector as a VSP. Wire the cable as shown below. Up to three Smart Relays can
be controlled by the OmniHub.
Valve Actuators
The OmniHub can control up to two valve actuators which allow automated control of pool/spa, water
features, cleaners or solar heating and is compatible with standard valve actuators manufactured by
Hayward, Pentair/Compool, and Jandy. Actuators have 15 ft cables that are terminated with connec-
tors that plug directly into the Hub as shown on page 11.
Temperature Sensors
The Wiring Hub utilizes 10K ohm thermistor type sensors with 15 ft cable. If a longer cable is re-
quired, contact the Hayward service dept. (908-355-7995) for information on suitable cable types
and splices.
Temperature sensors are wired to the 8 position connector shown on page 11 and on the follow-
ing page. To unlock, push on the corresponding lever with a small tool as shown. When pushed,
the connector will be open and able to receive the wire lead. For best results, strip back leads 1/8"
before inserting. After the wire is fully inserted, release the lever and the wire will lock in place.
Green
White
Black
Red
Smart Relay Connection
19
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
