Back
- Touch this button to go back to the previous set of configurable items.
As you are using Quick Edit, you will notice that at the end of each pathway, a Home button and
a Back button will appear. If you are finished making changes, press the Home button and then
press the Save button to save your configuration. If you would like to make more changes to the
same device, press the Back button. This will take you back to the last screen of configurable items
for that device. If you would like to continue to make changes, but to a different device, press the
Home button and then follow the pathway to the new device. The following pages will explain each
configuration pathway.
Begin Using Quick Edit
From the Quick Main Menu Screen, select one of the following buttons and follow the directions on
the next page to configure your equipment.
• Bodies of Water
• Backyard
• Sensors
• Interlocks/Add Interlock
• System Options
If Bodies of Water is selected:
Select the Equipment that you would like to configure -
The options are as follows: Filter
Pumps, Heaters, Cleaners, Water Features, Standalone Lights, Accessories, and Other Options.
If the equipment is not already configured, then the buttons will appear as Add Heater, Add
Cleaner, etc. When the button is pressed with the word “Add” before it, then you will be taken
through the full configuration for that equipment as appears in the Advanced Configuration
Guide section of this manual. Otherwise:
If Filter Pumps is selected:
Select the Filter Pump setting that you would like to add/modify
- the options
are described below.
Name -
Create a custom name if desired.
Type -
Change the type of Filter Pump that is configured (Single Speed, 2-Speed,
or VSP)
HUA -
Match the HUA (Hayward Unique Address) to the configured Filter Pump.
This option only appears if the Filter Pump is configured as a variable speed
pump.
Speed -
Change the minimum and maximum allowed speeds of the Filter Pump
as well as the Low, Medium and High speed settings. This option only appears
if the Filter Pump is configured as a variable speed pump.
Relay -
Select the relay(s) that is wired to the Filter Pump. This option only ap-
pears if the Filter Pump is configured as a single speed or 2-speed pump.
Off for Valve Change -
Select whether you want the Filter Pump to shut off while
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
48
