Hayward OmniHub Installation Manual Download

Page: 53 / 60

wish to delete.

If Water Features is selected:

Add Water Feature -

Pressing “Add Water Feature” from this screen will take you

through the full configuration for adding a new water feature. These steps are de-

scribed in the Advanced Configuration Guide section of this manual.

Select a Water Feature -

Once you select a water feature, all of the options for that

water feature will appear on the next screen. These options are as follows:

Name -

Create a custom name if desired.

Type -

Change the type of water feature that is configured (Waterfall, Waterslide,

etc.).

Pump -

Configure the water feature pump, if used.

Relay -

Select the relay that is wired to the water feature. This option appears

only if the water feature does not have an associated pump configured.

Valve -

Configure the water feature valve, if used.

Speed -

Change the minimum and maximum allowed speeds of the water fea-

ture pump as well as the Low, Medium and High speed settings. This option

only appears if the water feature pump is configured as a VSP.

Priming -

Select whether you want the water feature pump to prime. This option

is only available if the water feature pump is configured as a 2-Speed or VSP.

Freeze Protect -

Select whether you want the water feature to turn on for Freeze

Protection. Also set the Freeze Protect air temperature threshold from this

menu.

Delete a Water Feature -

From this screen, if you wish to delete a water feature

that is currently configured, select the Delete button on the right of the name of the

water feature that you wish to delete.

If Standalone Lights is selected:

Add Standalone Light -

Pressing “Add Standalone Light” from this screen will take

you through the full configuration for adding new ColorLogic Standalone lights (UCL,

CL 4.0 or CL 2.5). These steps are described in the Advanced Configuration Guide

section of this manual.

Select Group of Lights -

Once you select a group of ColorLogic Standalone Lights,

all of the options for those lights will appear on the next screen. These options are

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Summary of Contents for OmniHub





























































Search results

Summary of Contents for OmniHub

Reviews:

Related manuals for OmniHub

Brands by name

Popular brands

Hayward OmniHub, Installation Manual

Search results

Summary of Contents for OmniHub

Reviews:

Related manuals for OmniHub

Brands by name

Popular brands