USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
22
Operation
Home Screen
After completing the initial configuration, the AquaRite S3 will begin normal operation and display
the Home Screen. This is the default screen that is displayed continuously and offers important
information regarding the AquaRite S3’s operation. Refer to the diagram below to learn about the
Home Screen.
Quick Adjustments
The following adjustments can be made directly from the Home Screen.
Chlorination Setting
From the Home Screen, use the “+” and “-” buttons to adjust the desired chlorine level between 0%
to 100%
Heater Temperature Setting
From the Home Screen, use the “UP” and “DOWN” buttons to adjust the desired heater setpoint from
34º to 104º.
+
OK
ºF
ºF
SC
+
Current Time
- if
the AquaRite S3
controls the filter
pump, the pump’s
schedule will refer-
ence this time
Air Temperature
- requires the use
of a Hayward temperature sensor
Water Temperature
- requires the use of a
Hayward temperature
sensor
Super Chlorinate
- displays when the
AquaRite S3 is in
superchlorinaton
mode
Chlorination
Setting
- displays the current
chlorination setting
between 0 - 100%
Salt Reading
- this reading
displays the average salt level
in the pool/spa
