USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
1
IMPORTANT SAFETY INSTRUCTIONS
When using this electrical equipment, basic safety precautions should always be followed, including
the following:
•
READ AND FOLLOW ALL INSTRUCTIONS
• Use Copper Conductors Only
• Disconnect all AC power during installation.
• Warning - To reduce the risk of injury, do not permit children to use this product unless they are
closely supervised at all times.
• Hayward salt systems are designed, tested and sold as systems and are certified by several
agencies around the globe --- with each component of the systems meeting all required certi-
fications and attendant legal requirements. The use of an untested, uncertified generic cells (or
generic circuit boards) with Genuine Hayward salt chlorination products could lead to premature
product failure.
• Pursuant to the terms and conditions of any applicable Warranty, the use of a non-genuine
Hayward replacement salt chlorination cell on any Hayward automation or chlorination product
will void any Warranty.
• A green colored terminal is located inside the wiring compartment. To reduce the risk of electric
shock, this terminal must be connected to the grounding means provided in the electric supply
service panel with a continuous copper wire equivalent in size to the circuit conductors supplying
the equipment.
• All field installed metal components such as rails, ladders, drains, or other similar hardware
within 3 meters of the pool, spa or hot tub shall be bonded to the equipment grounding bus with
copper conductors not smaller than 8 AWG US / 6 AWG Canada.
• NOTICE TO USERS: This control product is to be used only in accordance with the directions of
this label. It is an offense under the Pest Control Products Act to use a control product under
unsafe conditions.
SAVE THESE INSTRUCTIONS
