manualshive.com logo in svg

Hawker 800 XP, Pilot Training Manual

Share
Download
Hawker 800 XP Pilot Training Manual Download Page 260

Revision 1

7-36

FOR TRAINING PURPOSES ONLY

HAWKER 800 XP

PILOT TRAINING MANUAL

FlightSafety

international

POWERPLANT GROUND
SERVICING

Engine Oil

Capacities

Total oil capacity of system:

U.S. pints—25

Imp. pints—22

Liters—12.5

Total capacity of tank:

U.S. pints—13.2

Imp. pints—11.7

Liters—6.24

NOTE

A card listing approved oil is located
in the airplane manual stowage. The
consumable quantity stated on the
card refers to the oil available for
use below the MIN level on the sight
glass and is sufficient for more than
12 hours engine operation at maxi-
mum oil consumption.

Approved Engine Oils

Mobil Jet II

Esso 2380

Castrol 5000

Aero Shell 500

Mobil Jet 254

Aero Shell 560

Engine Oil System Servicing

Check the level of the oil at the oil tank sight
glass visible through the viewing port in the
cowling lower access door.

NOTE

Check the oil level within 15 minutes
of engine shutdown. If the oil level
is not checked within this period,
start the engine and run at idle for 5
minutes, then check the oil level.
The oil level is indicated at the bot-
tom of the sight glass float ball.

Summary of Contents for 800 XP

























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands