Hawker 800 XP Pilot Training Manual Download

Page: 196 / 504

LIMITATIONS

FUEL LOADING

Fuel loaded into the wing tanks shall be equally
distributed between the two wing tanks.

Fuel must not be carried in the ventral tank un-
less each wing tank contains at least 3,450
pounds of fuel.

Before flight, the ventral tank must be com-
pletely filled or empty.

FUEL MANAGEMENT

During flight, including takeoff and landing,
the maximum difference in fuel quantity be-
tween the wing tanks is 500 pounds.

Fuel carried in the ventral tank shall be trans-
ferred into the wing tanks when the fuel level
in the wing tanks falls to 3,300 pounds.

The airplane must not be landed with fuel in
the ventral tank except in an emergency.

5-10

FOR TRAINING PURPOSES ONLY

HAWKER 800 XP

PILOT TRAINING MANUAL

FlightSafety

international

Summary of Contents for 800 XP

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 800 XP

Reviews:

Related manuals for 800 XP

Brands by name

Popular brands

Hawker 800 XP, Pilot Training Manual

Search results

Summary of Contents for 800 XP

Reviews:

Related manuals for 800 XP

Brands by name

Popular brands