Hawk HA-FM10, Manual

Page: 6 / 36

FUNCTION
1. Programming setting
System can program functions, please follow steps below:
1. Disarm the system, then switch ON ignition;
2. Press and hold II+III 2 sec, LED will flash once – pause – flash once , and siren
will sound 1 sec . It means that user come to program mode and stay in the 1st
level. Within 20 sec, you can press button I, II, III to confirm the function.
3. Follow below step within 20 sec (If nobody presses button or somebody switch
OFF ignition, system will exit program setting mode, LED will stop flash):
Press emergency switch twice within 2 sec, program mode will come from 1st
level to 2nd level, siren will sounds twice to confirm, LED will flash twice – pause
– flash twice.
Then press emergency switch 3 times within 3 sec to come next point, Siren
sounds 3 times and LED flashes 3 times – pause – flash 3 times.
If user needs to come 11th level, please press emergency switch 11 times within
11 sec, siren will sound 11 times, LED will flash 11 times – pause – flash 11
times.
4. Press and hold II 2 sec, if siren sounds 2 sec, all F function and program setting
will be default setting (underlined in part).
Programming table
FUNCTION
1. Programming setting
System can program functions, please follow steps below:
①
Disarm the system, then switch ON ignition;
②
Press and hold
II
+
III
2 sec, LED will flash once – pause – flash once , and siren will
sound 1 sec . It means that user come to program mode and stay in the 1
st
level. Within 20
sec, you can press button
I
,
II
,
III
to confirm the function.
③
Follow below step within 20 sec (If nobody presses button or somebody switch OFF
ignition, system will exit program setting mode, LED will stop flash):
Press emergency switch twice within 2 sec, program mode will come from 1
st
level to 2
nd
level, siren will sounds twice to confirm, LED will flash twice – pause – flash twice.
Then press emergency switch 3 times within 3 sec to come next point, Siren sounds 3
times and LED flashes 3 times – pause – flash 3 times.
If user needs to come 11
th
level, please press emergency switch 11 times within 11 sec,
siren will sound 11 times, LED will flash 11 times – pause – flash 11 times.
④
Press and hold II 2 sec, if siren sounds 2 sec, all F function and program setting will be
default setting (underlined in part).
Programming table
Function
level
Description of
function
Press
I ,
Siren
1 chirp
Press
II ,
Siren
2 chirps
Press
III ,
Siren
3 chirps
Press
I + II ,
Siren
4 chirps
Press
I + III ,
Siren
5 chirps
1
st
Door alarm delay
time
5 sec 30 sec OFF
2
nd
Pulse for central
lock
Ver.1 Ver.2 Ver.3 Ver.4 Ver.5
3
rd
Central lock auto Ver.1 Ver.2
4
th
Break line (CH1)
Method choosing
Ver.1
Ver.2
5
th
Enabling impulse
length for CH2
Ver.1
Ver.2
Ver.3
6
th
Safe roadside
parking function
Ver.1 Ver.2
7
th
Starter operation
time for auto start
Ver.1 Ver.2 Ver.3 Ver.4 Ver.5
8
th
Starter ON delay
before engine start
2sec 5sec 10sec
9
th
IGN2 ON/OFF at
remote start-up
Ver.1 Ver.2 Ver.3
10
th
Trunk/hood trigger
setting
Ver.1
Ver.2
11
th
Temperature reach
high level
Ver.1 Ver.2
Ver.3
─
02
─
3