Hawk HA-FM10, Manual

Page: 13 / 36

19. Auto arm function ON/OFF
Press and hold button IV ( F ) 2 sec, then press button IV ( F
) shortly many times, till remote controller LCD screen icon “
AUTO ” flashes.
At this time, press button I shortly, remote controller sounds
“Bi-”, LCD screen shows
“ AUTO ON ”, auto arm function is ON.
At this time, press button II shortly, remote controller sounds
“Bi-Bi-”, LCD screen shows “ AUTO OFF ”, auto arm function
is OFF.
Set auto arm function ON, stop engine, get off the car, close
the door properly, if user do not set arm, 10 sec later, siren will
sound 3 times and turning light flash 3 times, system activate
break line but doesn’t enter into arm status 30 sec later, and
central lock will not be locked.
At the same time, remote controller received the signal, if the
door is not locked, beep will sound. Then, LCD screen will
show “ ”.
20. Remote controller vibration ON/OFF (optional)
Press and hold button IV ( F ) 2 sec, then press button IV ( F )
shortly many times, till remote controller LCD screen icon
“ ” flashes.
At this time, press button I shortly, remote controller sounds
“Bi-”, LCD screen shows “ ON ”, remote controller vibration
function is ON.
At this time, press button II shortly, remote controller sounds
“Bi-Bi-”, LCD screen shows “ OFF ”, remote controller
vibration function is OFF.
21. Set siren volume for LCD remote fob
You can set siren volume.
Press and hold button IV ( F ) 2 sec, then press button IV ( F ) shortly many times,
till the remote screen icon “ ” flashes.
At this time, press button I shortly or press button II shortly select the volume from
1st level to 8th level, remote screen shows:
10