Hawk HA-FM10, Manual

Page: 10 / 36

10. Door alarm delay
System default setting door alarm delay is OFF, in this mode:
1. Press button I to set arm, if door (or trunk) do not be closed properly, siren will
sound 3 times and lights will flash 3 times (in mute status, only lights flash 3 times),
which can warn car owner to close door and set arm again. System will not warn
again otherwise door is closed and opened again.
At the same time, remote controller beep will sound“Bi-Bi-Bi”. If door do not be
closed properly, LCD screen will show “ ”. If trunk do not be closed properly,
LCD screen will show “ ”. Beep will sound “Bi-” each 30 sec to remind car
owner to lock the door and trunk. When closed door and trunk properly, remote
controller will not warn again.
2. While setting arm, door (or trunk) is closed properly, 2 sec later, if you open the
door, system will alarm.
If car has interior light delay, please set alarm delay time 5 sec (or 30 sec), in this mode:
1. Press button I to set arm, if door (or trunk) do not be closed properly, system en-
ter into arm status, system will not remind car owner to close the door and will not
warn. Otherwise, when the car owner set arm 2 sec later, close the door and open
again, 5 sec (or 30 sec) later siren will sound and lights will flash at the same time.
If boot is not be closed properly, siren will sound 3 times, and lights will flash 3
times. (In mute mode, only lights flash 3 times). At the same time, remote controller
beep will sound and screen will show “ ”, Beep will sound “Bi-” each 30 sec to
warn the user to close the trunk properly.
2. While setting arm, door (or boot) is closed properly, system will arm after open-
ing the door 5 sec (or 30 sec).
11. Pulse for central lock
System default setting is electric lock, 0.5 sec to close and 0.5 sec to open. If need,
you can set program to select pneumatic lock, 3.5 sec to close and 3.5 sec to open.
If you need two-step opening door function, you can set program to select pulse 0.5
sec to close and two pulses 0.5 sec to open.
Also, you can set other pulses for central lock with programming table.
12. Auto door closing when driving
System default setting auto door closing function is OFF, you can set program to ON.
While driving, user can press button I to lock the central lock, or press button II to
unlock, but system will not be armed or disarmed.
When switch ON ignition, you can close the door and step on foot brake, central
lock will be locked automatically for safety driving. When switch OFF ignition,
central lock will be unlocked automatically for easily getting off or getting on.
If a passenger needs get off during traffic, you can unlock the central lock, then step
on the foot brake, central lock is not locked to facilitate the passengers to get off.
When you open the door, and get off then closed the door, step on the foot brake,
lock function is automatically restored.
13. Channel 1 output (break line) choosing
System default setting is the main unit channel 1 output -250mA pulse for N.C.
engine stopper when armed. You can set program to output -250mA pulse for N.O.
engine stopper when disarmed.
7