Hawk HA-FM10, Manual

Page: 15 / 36

If press button II shortly, open the door and close it again, the system is still under
reservation mode and can be auto started (including remote engine start and timely
engine start) again.
Before using auto start, please check the car style. For manual gearshift car must be
set reservation mode first. There is a wire ring outside the main unit to set car style.
If your car is auto gearshift car, please cut this wire. If your car is manual gearshift
car, please keep this wire.
If car door (or trunk) is opened, hand-brake is pull down or reservation mode is
not successful, please press and hold button II, siren will sound 4 times and car can
not be started. At this time, remote controller LCD screen will show “ FAL ” .
And “ FAL ” icon will stay on the LCD screen before user press any button.
If auto start is failed, while press button III shortly to check the car condition,
remote controller LCD screen will show “ FAL ”.
The main unit channel 3 output -250mA pulse to bypass immobilizer while engine
running.
Hint:
1. The start-up time are 3 times, 0.5 sec, 1 sec and 2 sec (can be set to other time).
If it failed, please check ACC wires, ignition wires, start wires and engine start-up
testing line.
2. After starting, if the car is started again, please check engine start-up testing line
connection.
3. If you need to open the IGN2 when car is started, please use program.
4. During 5sec (or 30sec) alarm delay time, you can not use remote to start.
28. Starter ON delay before engine start (Diesel Mode)
This system is suitable for the car which need to warming-up before starting (such
as diesel car).
Start-up delay time default setting is 2 sec, you can program to 5 sec or 10 sec.
29. Reservation mode (Gear Mode)
For manual gearshift car, user must set reservation mode first. There are two meth-
ods to set reservation mode for system.
1. Auto reservation
Please follow steps below:
1. When stop the car, push the gearlever to neutral position before engine cut off stop.
2. Pull up hand- brake.
3. Pull out the key, engine remain running 3 min more.
4. Open the door and get off within this 3 min and then close the door, engine
is still running. During this time user can open and close doors many times. If
set arm, engine will stop automatically, reservation mode is set successfully. If
TURBO mode is ON, Engine will stop in time 1 min or 2 min or 3 min (depend
on F function settings for the Turbo delay). Auto start function can be used be-
fore next driving.
2. Manual reservation
Please follow steps below:
1. When park the car, push the gearlever to neutral position before engine off.
2. Pull up hand- brake.
3. Press and hold button I 2 sec, siren will sound once and lights will flash once,
main unit output ACC/IGN1/IGN2 signal. At this time, please pull out the igni-
tion key, engine remain running 3 min.
12