Hawk HA-FM10, Manual

Page: 17 / 36

32. Timely auto start function
You can set two timely auto start time. Press and hold button IV ( F ) 2 sec, then
press button IV ( F ) shortly many times, till the remote screen icon “ TIMER 1 ”
or “ TIMER 2 ” flashes. Default setting timely auto start function is OFF, remote
screen will show “ TIMER OFF ”.
At this time, press button I shortly, it can set the auto start time, figure will increase
with step 10 min, press and hold button I, figure will add 10 continuously. Press
button II shortly, figure will decrease with step 10 min, press and hold button II,
figure will reduce 10 continuously.
If you need to set 23:00 to TIMER 1 auto start, You can press and hold button IV
( F ) 2 sec, then press button IV ( F ) shortly many times, till the remote screen icon
“ TIMER 1 ”, remote screen will show “ TIMER OFF ” , then press button I shortly
or press button II shortly, till remote screen shows “ 23:00 ”. Then press button III
shortly to confirm, remote screen will show “ 23:00 ”. If you need cancel TIMER1,
you can press button III shortly again to cancel, remote screen will show “ TIMER
OFF ”.
TIMER 1 valid only once, but TIMER 2 valid day by day.
33. Low temperature auto start function
Press and hold button IV ( F ) 2 sec, then press button IV ( F )
shortly many times, till the remote screen icon “ °c ” flashes.
At this time, press button I shortly or press button II shortly to
select the time from OFF, 5°c, 0°c, –5°c, –10°c, –15°c to –20°c,
remote screen shows:
If you select the temperature –10°c, press button III shortly to confirm, then press
and hold button IV ( F ) 2 sec, remote will sound “Bi-Bi-”, it means that tempera-
ture setting is successful and exit.
14