Hawk HA-FM10, Manual

Page: 12 / 36

At this time, press button II shortly, remote controller sound
“Bi-Bi-”, LCD screen show “ OFF ”, shock sensor alarm
function is OFF, system can not receive shock sensor alarm
signal.
Hint:
If you do not need shock sensor, it is possible to temporarily disconnect the sensor
when leaving children or pets in the car. You can set it to off this function.
Note:
When re-power the remote and control the main unit, this function will be recov-
ered to default setting. It means system has shock sensor alarm function.
17. European mute mode ON/OFF
Press and hold button IV ( F ) 2 sec, then press button IV ( F )
shortly many times, till remote controller LCD screen icon
“ ” flashes.
At this time, press button I shortly, remote controller sound
“Bi-”, LCD screen shows “ ON ”, Europe mute function is
ON.
At this time, press button II shortly, remote controller sound
“Bi-Bi-”, LCD screen shows “ OFF ”, Europe function is
OFF, siren will sound.
Set European mute mode ON, press button I shortly to set arm,
lights flash once but siren will not sound, and you can press
button I shortly again within 5 sec to check system status,
lights flash once and siren will sound.
In this mode, siren will not sound (except: car is stolen or in
Anti-Hijacking mode, siren will sound unconditionally).
18. Valet mode ON/OFF
Press and hold button IV ( F ) 2 sec, then press button IV ( F )
shortly many times, till remote controller LCD screen icon
“ ” flashes.
At this time, press button I shortly, remote controller sounds
“Bi-”, LCD screen shows “ ON ”, valet mode is ON, all
functions will be stop except open and close central lock.
At this time, press button II shortly, remote controller sounds
“Bi-Bi-”, LCD screen shows “ OFF ”, valet mode is OFF,
all function can be used.
Note:
When re-power the remote and control the main unit, this
function will be recovered to default setting, and all function
can be used.
9