Hawk HA-FM10, Manual

Page: 14 / 36

22. SRP (Safe roadside parking) function ON/OFF
System default setting SRP function is OFF, you can set it to ON.
If you park the car roadside and open the door, lights will flash 15 times to warn.
23. Power disconnecting memory
When re-powered, system will keep the original status before power off.
24. Trigger memory
When disarm, if car is triggered (shock or opening doors), siren will sound 4 times
and lights will flash 4 times. Otherwise, siren will sound twice and lights will flash
twice (in mute status, siren will not sound).
25. Trigger status identification
If the alarm system is triggered under the state of arm, there will be two ways of
warning: one is hitting (such as the car door and windows by hit or external impact,
etc.), the siren will sound intermittently (in the state of mute only the lights flash,
the siren does not sound); the other is trigger (such as the car door is opened or the
engine is started), the siren will sound continuously.
26. Engine auto start work time setting
System default setting, auto start function is OFF. You can set
engine work 10 min or 20 min or 30 min.
Press and hold button IV ( F ) 2 sec, then press button IV ( F )
shortly many times, till the remote screen icon “ ” flashes.
At this time, press button I shortly or press button II shortly
to select the time OFF, 10 min, or 20min, or 30 min, remote
screen shows:
Then press button III shortly to confirm.
If user sets start function OFF, when remote controller enters into F function, LCD
screen will not show low temperature auto start, low car storage battery level auto
start and Timely auto remote engine start.
27. Remote engine start under Automatic Gear
In engine off status, press and hold button II 2 sec, if engine
is started, lights will flash slowly, and remote controller LCD
screen will show “ ”.
At this time, engine work 10 min continuously (user can set to
20 min or 30 min). If engine stop running within this 10 min,
system will auto start once again.
During this time, if press and hold button II 2 sec or pull down the hand-brake or
press the foot-brake, engine will be stopped.
If press button II shortly, user can open the door to get on the car. After opening the
door, user must turn the key to ON position within 60 sec, otherwise engine will be
stopped. If you press and hold button II 2 sec or pull down the hand-brake or press
the foot-brake in this time, engine also will be stopped.
11