Hawk HA-FM10, Manual

Page: 16 / 36

4. Open the door and get off within this 3 min and close the door, engine is still
running. During this time user can open and close doors many times. If you set
arm, engine will stop automatically, reservation mode is set successfully.
Situation of failure to set reservation mode:
1. If 3 min passed, engine will stop automatically, setting fails.
2. When pull out the ignition key, but hand-brake is pull down, setting fails.
Method for disable or cancel the reservation mode:
1. If you do not need auto start or must stop the car in stall (such as parking the car
on a slope), after pull out the ignition key, please hold button II 2 sec to stop the
engine running and do not set reservation mode.
2. After setting reservation mode successfully and engine do not working, if user
open the door, reservation mode will be cancelled.
3. If door is opened or ignited illegally, reservation mode will be cancelled.
30. Outer device trigger start function
If the main unit receives outer trigger signal for engine start, system will be entered
into automatic start function. If engine is started, lights will flash slowly, and remote
LCD screen will show “ ”. At this time, engine work 10 min continuously (user
can program 20 min or 30 min).
If car door is opened, or reservation mode is not successful, car can not be started.
This feature is easy to install an outer module for auto start.
31. Turbo function
This feature is available for turbo charged vehicles that can
keep the engine running automatically for 1 min (can set to
2 min or 3 min) when engine stop the car by ignition key. In
idle status, the turbo-charged system temperature decreases
gradually to avoid high temperature, it can effectively extend
the life of the engine.
Press and hold button IV ( F ) 2 sec, then press button IV ( F ) shortly many times,
till the remote screen icon “ TURBO ” flashes.
At this time, press button I shortly or press button II shortly to select the time from
OFF, 1 min, 2 min to 3min, remote screen shows:
Then press button III shortly to confirm.
Set turbo function to ON, when engine running 2 min later, pull up the hand-brake,
switch OFF ignition, the system automatically maintain the engine running for 1
min (or 2 min or 3 min). During this time, user can set arming or set disarming
many times, engine will not be stopped, if user press and hold button II 2 sec or
pull down the hand-brake, engine will be stopped.
For manual gearshift car, when set reservation mode, follow set arm and set mode
successfully, but the engine remains running, which is TURBO function working.
13