60
2420331560
E 04 07
GB
TELESCOPIC HANDLERS
3 - Telehandler/Attachment/Fork capacities
Before installing the attachment, check that it is approved and that the telehandler is equipped with
the relevant capacity chart.
To determine the maximum capacity of the telehandler and the attachment, use the smallest of the
following capacities :
• Capacity indicated on the attachment identification plate.
• The maximum capacity of an individual fork is defined according to the centre of gravity indicated
on the fork. The total fork capacity corresponds to the total capacity of a fork multiplied by the num-
ber of forks within the limits of the accessory's maximum capacity.
• Maximum capacity indicated on the relevant capacity chart.
• When the telehandler's load capacity differs from the capacity of the forks or the attachment, the
lower value becomes the overall load capacity.
Use the relevant capacity chart to determine the maximum capacity for the various machine
configurations. Lifting and placing a load may require the use of more than one capacity chart
depending on the machine configuration..
The forks must be used in matched pairs.
4 - Using the capacity chart with forks
To use the capacity chart properly, the operator must first determine and/or obtain the following :
• A HAULOTTE® approved attachment.
• The relevant capacity chart.
• The weight of the load to be lifted.
• The load placement data.
• The height at which the load must be placed .
• The distance where the load must be placed in relation to the telehandler's front tires.
• On the capacity chart, find the line corresponding to the height and follow it over to the distance.
• An alphabetical key (A, B, C, D, E, F) indicates the boom extension and a pendulum indicates the
boom angle (See Boom angle indicators).
Never use an attachment without the appropriate Haulotte
®
supplied capacity chart installed on the
telehandler. Failure to install the relevant Haulotte
®
supplied capacity chart could cause an accident
resulting in death or serious injury.
Summary of Contents for HTL4014
