Haulotte HTL4014, Operator'S Manual

Page: 157 / 194

A
B
C
D
E
F
G
H
I
151
2420331560 E 04 07 GB
TELESCOPIC HANDLERS
H
- LUBRIFICATION AND MAINTENANCE
11 - Every 250 hours of operation
11.1 - CHAIN TENSION CHECK AND ADJUSTMENT
• Check the telescoping chain tension and adjust if necessary, in accordance with the procedure set
out in Section H, 7.1.
11.2 - COOLING SYSTEM
• Clean the radiator slats.
• Clean with a pressurized jet of water or air.
11.3 - TRAVEL AXLES
• Perform the first drainage operation on the front and rear axles and the epicycloidal reducers after
the first 250 hours of operation and then every 1500 hours (See Section H, 13.1).
Level check every 500 hours (See Section H, 11.3).
11.4 - BATTERY
Battery check
• Perform the machine shut-down procedure.
• Open the battery access cover (under the cab).
• Wear safety goggles and visually inspect the battery. Check that the terminals are not corroded.
Replace the battery if its case is cracked, melted or damaged.
• Close and secure the battery access cover (under the cab).
Do not remove the filling plug when the engine is hot. DANGER OF BURNS! Loosen the plug to the first
notch and let it decompress, then unscrew the plug completely.
Only clean with water when the engine has cooled down.