Haulotte HTL4014, Operator'S Manual

Page: 154 / 194

148
2420331560 E 04 07 GB
TELESCOPIC HANDLERS
10 - Every 100 hours of operation
10.1 - TIRES
• Check that the tires are not damaged.
• Remove the valve rod cap.
• Add air if required.
• Replace the valve cap.
• Check the wheel lug nut torque (500Nm).
Perform the first torque check after the first 10h. of operation.
10.2 - DIESEL CIRCUIT
• Drain any condensate and clean the diesel pre-filter:
• Perform the first diesel pre-filter change after the first 100 hours of operation and then after 'every
1000 hours or once a year (See Section H, 12.2).
10.3 - INTERNAL COMBUSTION ENGINE
• Perform the first engine oil drainage and change the filter cartridge after the first 100 hours of ope-
ration and then every 500 hours (See Section H, 11.2).
Check the tire inflation pressure: at least 4.5 bars.
During a pressure check or an inflation operation, always face the thread and never the side of the tires.
• To access the diesel pre-filter situated next to the fil-
ling plug, remove the plate fixed by 3 HM10 screws.
• Drain the water and dirt by removing the screw situa-
ted under the pre-filter (1).
• Retighten the purge screw.
• Reassemble the plate
1