Haulotte HTL4014 Operator'S Manual Download Page 14 | Manualshive

Page: 14 / 194

background image

8

2420331560

E 04 07

GB

TELESCOPIC HANDLERS

3.4 - LOAD FALLING HAZARDS

The forks must be centred under the load and on the fork carriage and spaced apart as far as
possible.

3.5 - MECHANICAL ATTACHMENT LOCKING DEVICES

• Ensure that the person-lifting platform is securely fastened to the accessory locking device. Follow

the installation procedure set out in Section E.

• Ensure that the machine is placed on a firm and level surface.

• Activate the parking brake. Blocking the wheels is also recommended.

• Level the handler both sideways (chassis swaying) and lengthways (accessory tilt).

• Ensure that there is no-one under the accessory.

• Do not lift or transport anyone in the bucket or on the forks..

Never suspend loads from the forks or from any other parts of the fork carriage.

Do not drill holes in the fork(s).

Do not heat or solder the forks.

Never tilt the platform forward, rearward or sway the machine when the platform is occupied. Serious
injury or death could result.

Always ensure that the fork carriage or the attachment is correctly positioned on the boom and is
secured by a lock pin and a retainer pin. Incorrect installation could result in the fork carriage /
attachment / load disengaging, causing death or serious injury.

«
...
12
13
14
15
16
...
»

Summary of Contents for HTL4014



































































































































































































Reviews:

No comments

Related manuals for HTL4014

Brand: Goodman Pages: 42

Brand: York International Pages: 68

VUT R 400 TN EH EC A17

Brand: Vents Pages: 32

RIS 1200 VWL EKO 3.0

Brand: Salda Pages: 89

Brand: Magic Aire Pages: 30

Brand: Goodman Pages: 8

Airvents AV02 CFH 1500-R

Brand: Vents-us Pages: 16

Brand: Trane Pages: 20

Insight TWA030CD00A0

Brand: Trane Pages: 32

Performance Climate Changer PSCA

Brand: Trane Pages: 82

Brand: ComfortStar Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands