Haulotte HTL4014 Operator'S Manual Download Page 163

Page: 163 / 194

157

2420331560

E 04 07

TELESCOPIC HANDLERS

- LUBRIFICATION AND MAINTENANCE

13.3 - PRIMARY AIR FILTER

• Change the filter cartridge:

• Open the cover:

• Pull the trigger situated on the cover (See Section H, 6.5 (1))

• Locate the angular position of the cover, which should be identical upon reassembly.

• Turn the cover to the right (See Section H, 6.5 (2))

• Pull the cover to remove it

• Turn and pull the outer cartridge. (See Section H, 6.5 (3)).

• Change the outer filter cartridge.

• Reassemble the cover, checking that the dust evacuation valve is directed downwards.

13.4 - INTERNAL COMBUSTION ENGINE

• Check that the motor supports and the elastic mount attachments are in good condition.

Never clean the cartridge by hitting it against a hard surface or with a hot or inflammable liquid.

For the following operations, install the machine on a horizontal surface and stop the engine.

For all engine maintenance operations: consult the guide provided by the engine manufacturer or
HAULOTTE Services®.

Summary of Contents for HTL4014



































































































































































































Search results

Summary of Contents for HTL4014

Reviews:

Related manuals for HTL4014

Brands by name

Popular brands

Haulotte HTL4014, Operator'S Manual

Search results

Summary of Contents for HTL4014

Reviews:

Related manuals for HTL4014

Brands by name

Popular brands