Haulotte HTL4014 Operator'S Manual Download Page 171

Page: 171 / 194

165

2420331560

E 04 07

TELESCOPIC HANDLERS

- LUBRIFICATION AND MAINTENANCE

When the tank is empty:

Refer to the Lubricants and equivalents table in Section H, 14.5 for the type of oil used.

• Reassemble the drainage plug.

• Fill the tank with the recommended oil until the gau-

ge indicates the max. level.

• Reassemble the filling plug, (2) on the photo oppo-

site.

• Switch on the engine.

• Actuate the equipment controls in both directions for

approx. five minutes (without placing the cylinders
at the stops).

• Place the machine in road position.

• The level must be as indicated in the photo opposi-

te. Complete if necessary via the filling hole..

Summary of Contents for HTL4014



































































































































































































Search results

Summary of Contents for HTL4014

Reviews:

Related manuals for HTL4014

Brands by name

Popular brands

Haulotte HTL4014, Operator'S Manual

Search results

Summary of Contents for HTL4014

Reviews:

Related manuals for HTL4014

Brands by name

Popular brands